Success Story - Marine - Lubrication Oil
No turning manoeuvre without FG duplex filter
Working ships like tug- and fishing-boats or ferries need to be very maneuverable to operate on limited space. Hydraulic controlled turning transmissions are installed to enable the ship to do the assigned job in an economic and cost efficient way. A failure of these transmissions can cause disastrous dangers for humans and machines on the ship. Even under extreme conditions the transmission need to work reliably. A continuously high cleanliness of the lubrication oil has highest priority.
The challenge is only one shared filter unit for the lubrication circuit and the hydraulic switching multi disk clutch, The filter unit shall be easily accessible from the outside and shall be easy to operate and to maintain. The maintenance has to be possible without interruption of operation. The filter unit has to be approved by the established certification offices in the marine industry.
- Viscosity: 68 mm²/s at 40°C
- Volume flow: 30 l/min
- Filtration rate: 25 μm
- Operating pressure: 25 bar
The lubrication oil is filtered by a Filtration Group duplex filter of the Pi 210 series with a 25μm Premium Select filter element. Thanks to the duplex design of the Pi 210, the elements can be changed under full load by a simple switch of the operating filter. The Premium Select Technology ensures high cleanliness levels of the lubrication oil and extends the lifetime of bearings. The Inline filter could be installed easily directly at the housing without any additional pipings.
The aluminium filter housing is light and cost efficient. The Filtration Group Premium Select elements provide an up to 30% higher dirt holding capacity at reduced differential pressure in combination with a constantly high well-defined retention rate. This leads to significantly reduced maintenance requirements. Filtration Group provides easy operation of the duplex filters thanks to lever lock, pressure adjustment and user friendly single hand operation. An operating pressure up to 32 bar is possible. The Pi 210 Series is approved by the established certification offices in the marine industry (Lloyds, BV, GL, DNV).